EN
Touch screen with handle and button, perfect safety protection and emergency measures, professional stage machinery control system
With concise and clear control interface, simple and clear operation
The system runs stably and has excellent performance; the average five-failure time is 10,000 hours
Digital programming control system, multi-channel simultaneous centralized control, with electric lock control, emergency stop button, power prompt and top protection light. Each controller has the functions of raising, lowering and stopping.
Safety measures: phase sequence protection, missing item protection, upper and lower limit protection, anti-top protection. Frequency conversion speed regulation, PLC
1. The curtain and the second curtain machine installed in the stage have the function of opening and closing. It can be opened electrically or manually. Repeated operation has a faster response speed.
2. The second curtain machine is a device attached to the boom machine. The position is uncertain and is determined by the user according to the on-site conditions according to the needs of use.
3. Technical specifications: Guide rail load: 4.0kN
Opening/closing speed: 0.25m/s
Noise: < 45 dB(A)
Power: 0.75KW
4. The double curtain machine consists of guide rails, drive devices and transmission devices.
Specifically, it consists of the following parts: · Opening rails, opening traction devices, wire storage devices · Opening traction devices: including motors, reducers, brakes, pulley assemblies, wire ropes and accessories, etc.
5. The overlapping part of the opening rails in the middle is not less than 1.0m.
1. The boom machine installed on the top of the main stage is used to quickly lift the scenery, various curtains and second curtains, and can also hang lamps, etc. The boom machine can participate in the performance.
2. Technical specifications:
Linear rope boom machine, positioning accuracy: ±3mm Power: 2.2KW-7.5KW Positioning accuracy: ±3mm Load: 400KG-1000KG
Speed: 0.05- 0.5m／s
Noise: < 40 dB(A)3. The boom machine consists of a truss boom, a hoisting system, a control system and a protective device.
Specifically composed of the following parts:
· Truss boom · Hoisting system: motor, reducer, brake, inverter, resistor, drum, pulley assembly, wire rope and accessories, etc.
· Protective device: over-travel switch, rope disorder protection, overload protection, etc.
4. The control system requires the use of a computer programmable controller, which can be controlled on the main operating console.
5. With position closed loop function, the position encoder should be incremental.
6. On the operating table (disk), the position (travel), speed (time) can be set, and the action status can be displayed.
7. Position display and memory storage functions. There are up, down and emergency stop buttons and a separate joystick on the operating table.
1. The boom machine installed on the top of the main stage is used to quickly lift the scenery, various curtains and second curtains, and can also hang lamps, etc. The boom machine can participate in the performance.
2. Technical specifications:
Dual-axis boom machine, positioning accuracy: ±3mm Power: 2.2KW-7.5KW Positioning accuracy: ±3mm Load: 400KG-1000KG
Speed: 0.05- 0.5m／s
Noise: < 40 dB(A)3. The boom machine consists of a truss boom, a hoisting system, a control system and a protective device.
Specifically composed of the following parts:
· Truss boom · Hoisting system: motor, reducer, brake, inverter, resistor, drum, pulley assembly, wire rope and accessories, etc.
· Protective device: over-travel switch, rope disorder protection, overload protection, etc.
4. The control system requires a computer programmable controller, which can be controlled on the main operating console.
5. With position closed loop function, the position encoder should be incremental.
6. On the operating table (disk), the position (travel), speed (time) can be set, and the action status can be displayed.
7. Position display and memory storage functions. There are up, down and emergency stop buttons and a separate joystick on the operating table.
Pole body
Parallel pole body: H-frame 48 tube welding
Triangle truss pole: Triangle 48 tube welding
Single-point pulley: ￠150, no wire rope skipping or scraping during use
Single-point pulley: ￠150, no wire rope skipping or scraping during use
Pulley block: ￠150, no wire rope skipping or scraping during use
Wire-collecting frame: Steel plate welding, painted
Electric lighting pole machine
Light pole parameters:
Power: 2.2KW--5.5KW
Number of hanging points: 5 hanging points
Noise: ≤50Db
Load: 400KG-1000KG
Speed: 0.2m/s
Power supply: AC380V/50Hz
Effect picture
